Vervaet has unveiled the third-generation Hydro Trike self-propelled slurry applicator, with claimed increases in tank capacity, tractive power, lift capability and operator comfort aimed at improving performance and output in varied conditions.
Available as either a three-wheel model with a 17m鲁 tank or a five-wheel version carrying 21m鲁, both machines offer more than 1m鲁 of additional capacity compared with their predecessors. Power comes from a new 530hp Mercedes MTU engine, while Vervaet's new VSG 2.0 transmission claimed to deliver up to 45% more tractive effort at low speeds, with torque delivery up to 145,000Nm. Rear linkage lift capacity has also doubled to 10 tonnes, allowing the machine to carry heavier application equipment.
READ NOW: Opinion: Cleaner machinery is good 鈥� but who pays the bill?
The five-wheel model receives a redesigned driven centre axle, claimed to provide 30% more tractive power, while the slurry system can be specified with either a 9,000 or 13,500 litres/minute Borger positive displacement pump. An optional Superfill system shortens filling times by around 1.5 minutes through a higher-capacity suction arrangement, while a larger 10in suction pipe further increases loading performance during high-output operations.
Vervaet has also revised the tyre options, increasing the machine's contact area by around 30% to reduce soil compaction while maintaining a transport height below 4m. A wider choice of tyre sizes is available to suit different operating conditions and transport requirements.
READ NOW: Claas sets out its market ambition with new Axion 8 range
The Hydro Trike is fitted with a new Claas X11 cab and Vervaet's latest Machine Management System, providing improved visibility, greater operator comfort and a redesigned user interface that will eventually be introduced across the manufacturer's product range.
Production is scheduled to begin towards the end of 2026, with the initial pre-production machines already sold. A European demonstration tour will begin this summer, with UK importer J Riley Beet Harvesters (UK) Ltd expected to introduce the machine to the UK in early 2027.
听
